Total Hydraulic Fold and Self-Leveling: Boom is always parallel to the ground - even on hillsides!

• Boom comes standard with 4 function Fasse valve - it operates off of only 1 tractor outlet.
• Raise or lower right or left side separately to go over fences, terraces, ditches without effecting the opposite side.
• Spring loaded break-away end sections return to spray position if an obstacle is hit.
• Anything that moves has a grease fitting.
• Convertible boom sprays in 80' or 60' position.
• Transport width 12 1/2' wide and 10 1/2' height.
• Fits trailer or 3-point.
• Easy On or Off.
• 3pt Boom fits Category 3N, 3 or 4N.
• Adapter Only or 300, 400, 500 Gallon Tanks.

MODEL SLHFBQ60 w 300-GALLON 3PT. ADAPTER

• Total Hydraulic X-Fold w/Spring Loaded Break-Away End Sections.
• Dual Gas Charged Shocks and Iso-Torsion Mounts Make the Boom Stay with the Plane of the Ground and Bounce Free.
• Comes Completely Set Up with EPDM Hose (1' Feed Lines & 3/4" Boom Lines , Quick Tach Dripless Nozzle Bodies, and Your Choice of Nozzle Spacing.
• The 4-2" Heavy Wall Tubing Center Section Makes This Boom Extremely Heavy-Duty. Total weight is 1300#
• Greaseable Joints and Wear Points (anything that moves has a grease fitting).

HFBQ30 w/110 gallon 3PT

• Total hydraulic-folding boom w/spring loaded break-away end sections.
• Comes completely set up with EPDM hose, quick-tach dripless nozzle bodies and your choice of nozzle spacing.
• Greaseable joints and wear points (anything that moves has a grease fitting).

B7 - 7' Spray Coverage Boom, 2 flood nozzles on 42" spacing, EVA hose. Parts & Owners Manuel
FB10 - 10' Spray Coverage Boom, 3 flood nozzles on 40" spacing, folding breakaway action wings, EVA hose. Parts & Owners Manuel
FB14 - 14' Spray Coverage Boom, 4 flood nozzles on 40" spacing, folding breakaway action wings, EVA hose.
FBS15 - 15' Spray Coverage Boom, 9 flat fan nozzles on 20" spacing, folding breakaway action wings, EVA hose.
FBQ15T - 15' Spray Coverage Boom, 9 nozzles, 20" spacing, breakaway hinge, quick-tach, diaphragm check nozzle bodies, boom guards, EPDM rubber hose.
FBS21 - 21' Spray Coverage Boom, 13 flat fan nozzles, 20" spacing, breakaway hinge, EVA hose.
FBQ21T - 21' Spray Coverage Boom, 13 nozzles, 20" spacing, breakaway hinge, quick-tach, diaphragm check nozzle bodies, boom guards, EPDM rubber hose.
FBS30 - 30' Spray Coverage Boom, 3-section boom constructed with 1" square tubing. The wing sections feature 4-way boom hinges with breakaway action, heavy tension springs, and fold for transport. The center section is constructed of angle iron and square tubing. The hose kit includes: 1/2" EVA hose throughout the boom 19 standard nozzle bodies, caps, and flat fan tips on 20" spacing.
FBQ30 - Same as FBS30 except it is equipped with Quick Jet nozzle caps and no-drip Chem-Saver nozzle bodies and EPDM rubber hose.
EV187MT - Boomless Nozzles, sprays up to 35' wide, has individual nozzle control for left & right spraying, complete with mount for Universal sprayers or 3-pts.
FBQ11BB - 7 Nozzle Spray Boom /20" Centers + 2 Boomless Nozzles /Sprays 43'/10GPA @5 MPH. This boom is a combination of a conventional boom plus boomless nozzles - works excellent for pastures or in trees. Overall width of boom is 12' but sprays 43'.
B25BB-ATV - Nozzles Spray 6' or 16' or 25' - Left, Right or Center Control - 3.5 GPM Pump - 10 Gallon per Acre @ 4.5MPH with any combination of nozzles. (See photos below).

• 500, 750, 1000 Gallon Trailers with Large operator platforms.
• Tandem Axle or Large Single Tires.
• 45, 51, 60 Foot Self-Leveling, Hydraulic Cross-Fold Booms (dual shocks keep it level & torsion mounts isolate boom from trailer).
• Frame mounted Hydraulic Driven Centrifugal Pump or Gear Driven Centrifugal Pump with Jack Shaft, Bearings, & PTO Shaft.
• Greaseable Trailer & Boom (anything that moves is greaseable).
• Corner Quick Fill with Check Valve.
• Elliptical Tank with Deep Sump.
• 9, 22 or 33 Gallon Front Mounted Foam Marker.

STANDARD TRAILER FEATURES:

• 500, 750, 1000-Gallon Rotation Molded, 1 Piece Poly Tank with Sump and 10" Fill Well.
• 3"x5" Rectangular Tube Frame, 4"x6"x90" Axle, Walking Tandem Wheel Assemblies with 4 - 12.5Lx15 Tires and Rims or Large Single Tires.
• Adjustable Hitch, Large Work Stand with Handrail and Retractable Step.
• Frame-Mounted Hydraulic Driven Pump or Gear Drive Pump with Jackshaft & Pillow Block Bearing Enclosed for Operator Safety from Pump to PTO Shaft, Reduces Pump Vibration and Increases Pump Life.
• Heavy-Duty Screw Jack.
• 3-Gallon Wash Tank.
  

45', 51' or 60' Spray Coverage Boom:

• Hydraulic Fold and Self-Leveling Action.
• Quick Tach Nozzles and Caps.
• No-Drip Chem Savers.
• 1" EPDM Grade Rubber Supply Hoses and 3/4" EPDM Grade Rubber Hose between Nozzles.
• Your Choice of Nozzles on 20" Centers.
• NOTE: Hydraulic Cylinders are Included But NOT Hydraulic Hoses.
• Plumbing includes Reinforced EPDM Suction Hoses, Quick-Fill, Deluxe Strainer.
• Equipped for Use with Electric Controls (Does NOT Include Control or Valves).

• 1000 or 1250 Gallon Trailer Sprayer Capable of a 60" Row Spacing with 13.6x38 Single Tires.
• 60' Extreme Duty, Self-Leveling, Hydraulic Cross-Fold Boom (Dual Shocks Keep Boom Level & Torsion Mounts Isolate Boom from Trailer).
• Frame Mounted Pumps: Hydraulic Driven Centrifugal or Gear Driven Centrifugal with Equal Distance PTO Shaft.
• Fresh Water Safety Tank - Corner Quick Fill with Check Valve (NOT BOTTOM FILL).
• Heavy-Duty Poly Crop Care Tank with Deep Sump.
• 9, 22 or 33 Gallon Front Mounted Foam Markers.
• Greaseable Trailer and Boom (Anything that moves is greaseable).

If you want narrow row spacing with large single tires - this is your SPRAYER!!!!

STANDARD TRAILER FEATURES:

• 1000 or 1250-Gallon Rotation Molded, 1 Piece Poly Tank with Sump and 10" Fill Well.
• 60" TO 144" Row Spacing with 13.6x38 Single Tires.
• 3"x5" Rectangular Tube Frame, 4"x6"Axle with 8 Bolt Hubs and Your Choice of Axle Length.
• Adjustable Hitch, Large Work Stand with Handrail and Retractable Step.
• Frame-Mounted Hydraulic Driven Pump or Gear Drive Pump with Equal Distance Enclosed PTO Shaft - Reduces Pump Vibration and Increases Pump Life.
• Heavy-Duty Screw Jack.
• 3-Gallon Wash Tank.

60' Spray Coverage Boom:

• Hydraulic Fold and Self-Leveling Action.
• Quick Tach Nozzles and Caps.
• No-Drip Chem Savers.
• 1" EPDM Grade Rubber Supply Hoses and 3/4" EPDM Grade Rubber Hose between Nozzles.
• Your Choice of Nozzles on 20" Centers.
• NOTE: Hydraulic Cylinders are Included But NOT Hydraulic Hoses.
• Plumbing includes Reinforced EPDM Suction Hoses, Quick-Fill, Deluxe Strainer.
• Equipped for Use with Electric Controls (Does NOT Include Control or Valves).

• Heavy-Duty 3-Point.
• Poly Tank with 10" Lid.
• Bolt-On Saddle with Welded in Tank Support.
• Heavy-Duty One-Piece Welded Frame Constructed Out of 3"x3" Square Tubing and Flame-Cut 3-Point Arms.
• Category-II 3-Point Hitch Pins and Square Tubing Legs.
• Regulator Kit is Equipped to be Used with a Roller or Centrifugal Pump and Includes: Hoses, Clamps, Fittings, Line Strainer, Gauge and Pressure Relief Valve.
• LESS PUMP.
• This Unit Fits Most Quick Hitches.

• Poly Tank with 5" Lid.
• One-Piece Welded Frame Constructed from 2"x3" Angle.
• Category-I 3-Point Hitch.
• Fits Most Quick Hitch.
• Regulator Kit is Equipped to be Used with a Roller or Centrifugal Pump and Includes: Hoses, Clamps, Fittings, Line Strainer, Gauge and Pressure Relief Valve.
• LESS PUMP.

Universal sprayers are manufactured with a formed steel frame and are designed to be as compact as possible. Sizes include a 60-Gal, 110-Gal, 150-Gal. and 200-Gal. All sizes have either a 12 volt diaphragm demand pump system (3.5 OR 4.0 GPM or 45 PSI) or an engine powered system. The engine system has the pump directly coupled to the engine which eliminates alignment problems. This also extends the life of both the engine and the pump, due to less stress on shafts and bearings.

The specs on the pumping units are as follows:

• 12 Volt Electric - 3.5 GPM 45 PSI or 4.0 GPM-60 PSI, 12 VDC demand diaphragm pump.
• Roller Units
• 4-roller direct coupled Briggs & Stratton 3.5 HP engine. 7GPM and up to 150PSI.
• 6-roller direct coupled Briggs & Stratton 5.5 HP gear reduction engine. 9.7 GPM or 300 PSI.
• 5-roller direct coupled Briggs & Stratton 5.5 HP gear reduction engine. 25 GPM or 200 PSI.
• Honda engines are also available.

All models come with 25'x3/8" gun hose, handgun with adjustable tip, suction strainer, gauge, automatic relief valve and poly tank with 5" fill well. 7', 10', 15' and 21' spray coverage booms can be used on the Universal sprayers.

By adding your choice of transport pull kits to a universal skid sprayer, you can make a tow-behind sprayer. Between the design of the formed steel frame and the pull kit, the sprayer becomes as low-profile as possible, making it more stable on steep slopes. The universal design allows the sprayer to be set up as a front-mounted pumping unit or a rear-mounted pumping unit, whichever way your customer wants. No extra parts are needed for this change! When the pumping unit is mounted on the rear of the sprayer, it cuts down on engine noise and fumes for the operator. 7', 10', 15' and 21' spray coverage booms are optional and fit any configuration with no additional parts.

• USPULL40/60 Transport Kit. 15x600-4 tires and tongue w/stand.
• USPULL40/60F Transport Kit. 18x8.50-8 flotation tires and tongue w/stand.
• USPULL110F Transport Kit. 18x8.50-8 flotation tires and tongue w/stand.
• USPULL150F Transport Kit. 18x8.50-8 flotation tires and tongue w/stand.
• USPULL200F Transport Kit. 11Lx15 flotation tires and tongue with jack.
• USPULLTAN-F Tandem Float Kit with 4 - 22x11x8 flotation tires and tongue with jack.

• 20' Single Axle
• 25' Single Axle
• 30' Single or Tandem Axle
• 36' Tandem Axle
• 40' Tandem Axle

STANDARD FEATURES:

• Narrow Front Wheels Add to Pulling Stability and Give a Tighter Turning Radius (especially when backing).
• Torflex Back Axle Gives Your Head Carrier a Bounce Free Ride Even on the Roughest Roads.
• Universal Style, Adjustable Lower Mounts Fit Any Style Head, Makes Loading & Unloading Quick and Easy, Capacity 17,500 lb.
• Highway Speed Trailer Tires (225-75x15 Load Range D) (T235-80R15 Load Range E - Tandems).
• Chain Tie Downs.
• Pin Hitch with Safety Chains.
• Extra Sickle Storage.

Options:

• Brakes on Torflex Axle (12V DC Electric).
• Light Package (Turn, Brake & Tail).
• Ball Hitch (2 5/16, 12500# Rating).
• Front Fenders (Protect Both Head & Pulling Vehicle).
• Spare Tire with Mount.
• Telescopic Tongue (24").
• Ratchet Strap.

STANDARD FEATURES:

• Heavy Duty 4" Box Tube Construction.
• Carrying Capacity 6500#.
• Chain Tie Downs.
• Pin or Pintle Hitch w/Safety Chains.
• Highway Speed Tires (225-75x15 Load Range D).
• Universal Style, Adjustable Lower Mounts Fit Any. Style Head, Makes Loading & Unloading Quick & Easy.
• 2-Wheel Maneuverability.

Made to Move your Head in and out of Storage or Down the Road.

Option:

• Light Package (Turn, Brake & Tail).

• 36' Tandem Axle
• 39' Tandem Axle
• 41' Tandem Axle

STANDARD FEATURES:

• Narrow Front Wheels Add to Pulling Stability and Give a Tighter Turning Radius (especially when backing).
• Torflex Back Axle Gives Your Head a Bounce Free Ride Even on the Roughest Roads.
• Universal Style, Adjustable Lower Mounts Fit Most Style Heads, Makes Loading & Unloading Quick and Easy, Capacity 21,000 lbs.
• Highway Speed Trailer Tires (T235-85R-16 Load Range E 10 Ply).
• Pin Hitch with Safety Chains.
• Extra Sickle Storage.

Options:

• Brakes on Torflex Axle (12 VDC Electric).
• Light Package (Turn, Brake & Tail).
• Ball Hitch (2 5/16, 12500# Rating).
• Front Fenders (Protect Both Head & Pulling Vehicle).
• Spare Tire with Mount.
• Telescopic Tongue (24").
• Ratchet Tie Down Strap.